Traditional driller with electric rotation and hydraulic feeding system by means chromate steel double guide. Specifically designed to make the diamond wire guiding holes on marble and soft stones, the HDM is a sturdy and easy to use machine, studied for the heavy work of the quarry in the safest conditions.
We have 2 number of these machine, which will be sold in an "as seen state". It is electrically powered with a 40HP motor.In Stock
The isp 640 is a pneumatic expansion bag system, to move blocks and benches after cutting with diamond wire. the bags are made of special rubber, dust and dirt proof. Flexible hoses connect the bags to the pneumatic control unit, equipped with a pressure regulator to expand the bag according to the required push for a proper opening of the block. Four bags can be connected to the control unit.
The Benetti chain saw machine model CSM 961 can perform vertical and horizontal dry cuts in limestone, marble and non-granitic dimension stone.
The chain saw model csm 962 can make vertical and horizontal cuts up to a maximum depth of 4,50 meters in marble, limestone and similar stones. Are available arms and chains for usefull cut from 2 to 4,50 meters.
The chain saw machine model csm 963 is equipped with one auto-translating single piece rail of 6 meter length; the machine can perform vertical cuts with depth up to 5 meters and horizontal cuts with depth up to 4,5 meters in marble, limestone, and similar stone. Arms and chains are available of useful cut from 2 up to 5 metres.
The chain saw model csm 968 can make vertical cuts up to a maximum depth of 7,30 meters and horizontal cuts up to 4,50 meters in marble, limestone and similar stones. Are available arms and chains for usefull cut from 3,25 to 7,30 meters.
Without doubt Benetti are the most popular manufacturer of wire saws for quarrying operations in the UK.. We have sold more than 50 machines over the past 15 or so years, many of them still working, which says alot for the quality.
The new hdm 635 drilling machine is designed to make the intersecting holes of 76 / 90 mm in diameter, where to pass the diamond wire in quarries of marble and granite. The drilling is made by a down-thehole hammer. The rotation and the advancement movements of the drilling are made possible via hydraulic motors.
Hydraulic jacking plant, extremely compact and easy to move, used for pushing and overturning large rock masses and benches. The pushing capacity is 300 tons with two 150 mm stroke jacks. It is basically composed of a hydraulic pumping unit giving 700 bar pressure and one or more hydraulic jacks with different stroke and capacity.
The hydro - BaG 645 system is composed of an electric high pressure water pump and uses "disposable" metal bags which are only 2 mm thick. This makes it easy to insert them into the cut space made by the diamond wire. Hydro-bag is very strong and reliable. Two bags can work at same time, total push 600 ton.
Pneumatic drillers down-the-hole hammer system, designed to make the guiding holes for diamond wire. featured by high penetration speed, lightness and ease of use, they can hole vertical, horizontal and on any directions with 76/90 mm cylindrical rods. it is possible to dismantle the machines into different parts, for easier transportation and movement, especially in rough areas.
Electric diamond belt sawing machine, designed to make tunnel cuts, vertical and horizontal. The JET BELT 940 is composed of two columns with two telescopic extensions for the machine fixing, connected with an horizontal beam of 462 cm that bears the electric cutting unit. This is composed of the main motor and the cutting arm with the diamond belt installed.
Diamond belt sawing machine for vertical and horizontal cuts. The cutting tool consists of a special plastic belt with sintered diamond segments. Only water is used during the cutting phase, both for lubrication and cooling. The system is “ecological”, because no grease or oil are used during the working phase, so that to prevent dust production and grease pollution. The super Jet Belt 950 is electric driven, with electronic control of speed and advance; it can cut up to 3,40 meters depth.
We have part exchanged this machine for some wire saw machines for the quarry. A really lovely example of a quarry belt saw, which has not done much work. Ideal for any marble, limestone, slate quarry for either in the UK or overseas. Grab a real bargain before someone else does !In Stock
Innovative chain saw machine, specifically designed to easy all marble undergroung mine operations. The tcm 988 allows to cut along the horizontal and the vertical direction in only one positioning of the frame, by means of armand chain cutting unit mounted on a double 360° rotating centre plate. The “tcm 988” can be equipped with rails, which facilitate the widening of the mine walls, keeping the horizontal cuts perfectly aligned one another, all along the travel of the machine.
The chain saw model CST 965 is a cutting chain mounted on the rear of a wheeled tractor cab, called Terna. The machine is self powered and provides ease of handling and positioning. It can perform vertical cuts up to the maximum depth of 3.25 meters on marble, limestone and stone materials of similar hardness. The machine is ideal for squaring blocks and for the making series of front cuts.
The diamond wire saw model TL 920 is light duty, designed to make small cuts and for block squaring in quarries of marble, limestone, and similar stone materials. The model with inverter control system allows to vary the diamond wire speed from 0 to 36 m/sec. in order to optimize its consumption and get the best performances, even on very hard materials.
The smallest, and most versitile of the Benetti range of quarrying diamond wire saws. This machine is relatively light, and can be set up quickly and accrately. A popular machine for relatively small cuts, and squaring the blocks. Variable speed spindle motor makes it suitable for construction and quarrying works.In Stock
Special machine properly studied and manufactured to cut big blocks, boulders and benches, when diamond wire speed adjustment is required. An inverter device is used to control and constantly adjust the diamond wire speed from 0 to 40 m/sec., according to the type of stone.
The diamond wire saw mod. vip/914 is a compact design, which can cut in any direction, vertical, horizontal, or inclined, straight against the wall/floor of the benches, in quarries of marble or granite. This machine allows to make two adjacent cuts at 160 cm distance from each other in a single positioning on rails. The rotation and the lateral adjustment of the drive unit are motorized.
Manufactured with first quality materials and components, the vip 915 is a strong and reliable machine that allows to easily make great cuts on any kind of material. The feed movement is automatically controlled by a special electronic “supercard” that allows a precise and complete management of the diamond wire during the cutting phase, so that to obtain the best output and production on any material.