searchWIRE SAWResults (7)

Pre-owned
WIRE SAW

BENETTI - ALPHA-840

We have 2 number of these machine, which will be sold in an "as seen state". It is electrically powered with a 40HP motor.

In Stock
New
WIRE SAW

BENETTI - GAMMA 875

Without doubt Benetti are the most popular manufacturer of wire saws for quarrying operations in the UK.. We have sold more than 50 machines over the past 15 or so years, many of them still working, which says alot for the quality.

New
WIRE SAW

BENETTI - TL 920

The diamond wire saw model TL 920 is light duty, designed to make small cuts and for block squaring in quarries of marble, limestone, and similar stone materials. The model with inverter control system allows to vary the diamond wire speed from 0 to 36 m/sec. in order to optimize its consumption and get the best performances, even on very hard materials.

Pre-owned
WIRE SAW

BENETTI - TL 920

The smallest, and most versitile of the Benetti range of quarrying diamond wire saws. This machine is relatively light, and can be set up quickly and accrately. A popular machine for relatively small cuts, and squaring the blocks. Variable speed spindle motor makes it suitable for construction and quarrying works.

In Stock
New
WIRE SAW

BENETTI - VIP 910

Special machine properly studied and manufactured to cut big blocks, boulders and benches, when diamond wire speed adjustment is required. An inverter device is used to control and constantly adjust the diamond wire speed from 0 to 40 m/sec., according to the type of stone.

New
WIRE SAW

BENETTI - VIP 914

The diamond wire saw mod. vip/914 is a compact design, which can cut in any direction, vertical, horizontal, or inclined, straight against the wall/floor of the benches, in quarries of marble or granite. This machine allows to make two adjacent cuts at 160 cm distance from each other in a single positioning on rails. The rotation and the lateral adjustment of the drive unit are motorized.

New
WIRE SAW

BENETTI - VIP 915

Manufactured with first quality materials and components, the vip 915 is a strong and reliable machine that allows to easily make great cuts on any kind of material. The feed movement is automatically controlled by a special electronic “supercard” that allows a precise and complete management of the diamond wire during the cutting phase, so that to obtain the best output and production on any material.